glazing compound การใช้
- Apply a thicker line of glazing compound along the edges of the glass.
- Putty, or glazing compound, should always go on the outside.
- Cold weather can cause putty and glazing compound to harden, crack and break away.
- The paint, not the glazing compound, is what makes the sash waterproof and weatherproof.
- Fill the existing holes with caulking or glazing compound.
- Inspect the windows to make sure that the glazing compound is sound around each pane.
- Apply a thin bead of glazing compound ( about one-eighth inch ) around the rabbet.
- A . Use glazing compound to fill the holes.
- Windows in the door are glazed with glazing compound.
- Q . Can I use glazing compound to fill nail holes in an interior plaster wall?
- Glazing compound should be painted after it dries.
- Use a good glazing compound; Dap is good.
- Glazing compound usually deteriorates along the bottom edge, and maybe a few inches up each side.
- Putty or glazing compound is the clay-like substance put around the glass to create an airtight seal.
- With clean hands roll the glazing compound into a rope about three-eighths of an inch in diameter.
- Then apply a bead of glazing compound.
- Replace the glazing compound where necessary.
- The glazing compound creates a watertight seal around the glass, but it does not hold the glass in place.
- To control them, squirt insecticide into the holes and plug them with a big wad of glazing compound or other putty.
- A . I don't suppose these so-called glaziers will come back and do the puttying ( with glazing compound ) properly.
- ตัวอย่างการใช้เพิ่มเติม: 1 2 3